Refrigerant Lines, Removing And Installing, From Connection Point To Rear Expansion Valve: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch off the ignition.
-- Discharge the refrigerant circuit. Refer to Refrigerant Circuit or A/C SERVICE STATION, USING .
-- Remove the refrigerant lines from the rear expansion valve. Refer to REAR EXPANSION VALVE, REMOVING AND INSTALLING .
-- Remove the nut -E-, release the catch -arrow- and open the bracket.
-- Release the retainers and open the cable holder -F-.
-- Remove the bolt -D-.
-- Remove the refrigerant lines to the rear expansion valve -A and C- from the refrigerant lines -B- and to the front heater and A/C unit.