Cover And Cushion, Separating, Rear Bench Seat: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bench seat cover and the cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
1/3 Bench Seat:
-- Disengage the moldings -arrows- on the wire frame and pull back the cover.
2/3 Bench Seat:
-- Disengage the moldings -arrows- on the wire frame and pull back the cover.
3/3 Bench Seat:
-- Disengage the moldings -arrows- on the wire frame and pull back the cover.
Continuation:
-- Remove the cover -2- as much as possible from the cushion -1-.
-- Cut through the upholstery clips -arrow- with pliers.
-- Cut the remaining upholstery clips and remove the cover from the cushion.