Cover And Cushion, Removing And Installing, Rear Bench Seat: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seats all the way forward.
-- If equipped, remove the child seat anchor. Refer to REAR CHILD SEAT ANCHOR, REMOVING AND INSTALLING .
One-piece Rear Bench Seat:
-- Pull the release -4- on the mounting grommets -3- toward the front -arrow- and pull the rear bench seat cushion upward.
Multiple-piece Rear Bench Seat:
-- Pull the release -4- on the mounting grommets -3- toward the front -arrow- and pull the rear bench seat cushion upward.
Continuation:
-- Lift the front of the 2/3 rear bench seat cushion -1- slightly and remove the wire frame -2- forward from the frame -3- -arrows-.
-- Depending on vehicle equipment, release and disconnect any connectors.
-- Remove the rear bench seat from the vehicle.