Seat Depth Adjuster Heating Element, Removing And Installing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
The old seat heating element remains on the cushion and will be covered by the new heating element.
Procedure
-- Remove the cushion. Refer to SEAT BOLSTER CUSHION / COVER AND CUSHION ON SEAT PAN, REMOVING AND INSTALLING, COMFORT/SPORT/SUPER SPORT SEAT .
-- Cut the wire directly on the old heating element.
-- Align the new heating element -arrow- on the cushion.
-- Peel the protective film off the heating element one after the other. Be careful not to damage the heating element.
-- Glue the heating element so that it aligns with the old heating element and is not wrinkled.
Further installation is performed in reverse order of the removal.