Seat Frame Trim Panel, Removing, 1/3 Rear Seat:
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bench seat cover and cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
-- If possible, position the 1/3 rear seat as far forward as possible using the forward/back adjustment.
-- Loosen the cover -1- from the seat frame trim panel -3- and remove in -direction of arrow A-.
-- Remove the expanding rivets -2-.
-- Release the rear seat backrest and fold it forward.
-- Loosen the seat frame trim panel -3- upward from the seat frame and remove -direction of arrow B-.
Installing
Install in reverse order of removal.