LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 313 (Seat Frames) >> 72 Seat Frames >> Rear Seats >> Pass-Through Cover Frame, Removing And Installing >> Removing

Pass-Through Cover Frame, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seats all the way forward.

-- Remove the headrest guides. Refer to HEADREST GUIDE, REMOVING AND INSTALLING .

-- Remove the center cushion. Refer to CENTER CUSHION, REMOVING AND INSTALLING, BACKREST WITH PASS-THROUGH .

-- Remove the locking mechanism trim. Refer to LOCKING MECHANISM TRIM, REMOVING AND INSTALLING .

-- If equipped, remove the clips -arrows- with the Pry Lever:80-200  .

GWWA72-12256Courtesy of AUDI

-- Pry out and remove the trim panel cover clamping strips -1- from the backrest frame with a screwdriver.

-- Fold the center folding backrest upward.

-- Fold the center armrest up.

-- Unclip the cap -2- with a small screwdriver.

GWWA72-12257Courtesy of AUDI

-- Remove the bolt -1- behind it.

-- Unclip the cover -3- -arrows- with the Trim Removal Wedge:3409  and remove it.

-- Disengage the molding -arrows-.

GWWA72-12692Courtesy of AUDI

-- Unclip the upper folding backrest cover -1- from the backrest frame -arrow A-.

GWWA72-12380Courtesy of AUDI

-- Remove the trim panel upward -arrow B- from the center armrest bracket.