Locking Mechanism Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Fold the backrest with the pass-through forward.
-- Move the headrest all the way up.
-- Release the retainers with a small screwdriver consecutively -A and B arrows- and remove the trim -1- for the locking mechanism upward at the same time -arrow C-.
 Courtesy of AUDI
|