Headrest, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Using a small flat-head screwdriver, press the locking spring as until it stops through the opening -arrow- in the headrest guide -1-.

Fig 1: Using A Small Flat-Head Screwdriver Press Locking Spring Through Opening In Headrest Guide

Courtesy of AUDI

-- At the same time, pull the headrest -2- out of the rear seat backrest -3- as far as the stop and hold it in that position.

-- Press the height adjuster release button -3- on the headrest guide -4- -arrow-, pull the headrest -1- up out of the backrest -2-, and remove the headrest.

Fig 2: Headrest

Courtesy of AUDI