Bench Seat/Single Seat, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the seat bolt caps and remove forward in the -direction of the arrow-.
-- Remove the bench seat cover and cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
-- Depending on vehicle equipment, release and disconnect any connectors.
-- To protect the sill panel before prying out the rear seat, apply the Universal Vehicle Protector:VAS 871 001 .
-- If possible, position the rear seat as far back as possible using the forward/back adjustment.
-- Remove the bolts -arrows-.
-- Fold the backrest on the rear seat -2- forward.
-- Remove the rear seat -1- carefully from the vehicle with a second technician.