Upper Center Seat Rail Cover, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seat into its highest position.
-- Remove the seat frame trim panel on the side sill side. Refer to SEAT FRAME TRIM PANEL ON SIDE SILL SIDE, REMOVING AND INSTALLING .
-- Remove the threaded stud -3-.
-- Remove the expanding clip -2- on the upper center seat rail cover -1-.
-- Release the rear hook at the inside of the seat rail -arrow-, and lift up the rear cover slightly.
-- Release the upper center seat rail cover by sliding in the direction of travel, and remove it.