Tunnel-Side Seat Frame Trim Panel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Unscrew the front seat and tip forward with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Release the backrest cover tension bands -arrow- at the bottom of the seat pan.
-- Remove the expanding rivet -1-.
-- Press down the tab -arrow- at the inside of the seat rail.
-- Remove the seat frame trim panel on the tunnel-side -2-.