Seat Angle Adjuster, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seat into its highest position.
-- Unscrew the front seat and tip to the rear with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Remove the bolt -1- for the seat angle adjustment motor adjusting spindle.
-- Release and disconnect the connector -2- from the seat angle adjustment motor.
-- Remove the bolts -4-.
-- Remove the seat angle adjustment motor -3-.