Overview - Front Seat
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Cover
- For the connector station
- Bolt
- Quantity: 4
- 50 Nm
- Front spindle cover
- Clip into the cover
- Quantity: 2
- Removing and installing. Refer to FRONT AND REAR SEAT RAIL COVER, REMOVING AND INSTALLING .
- Clip
- Quantity: 2
- Front Seat Mount
- Under the carpet
- Clipped in the vehicle floor
- Spindle rear cover
- Clip into the cover
- Quantity: 2
- Removing and installing. Refer to FRONT AND REAR SEAT RAIL COVER, REMOVING AND INSTALLING .
- Front Seat
- Removing and installing. Refer to FRONT SEAT, REMOVING AND INSTALLING .
- Connector
- With a corrugated tube for the modular wiring routing
- Modular Wiring Routing, Disconnecting and Connecting. Refer to MODULAR WIRING ROUTING, DISCONNECTING AND CONNECTING .
- Connector Station
- Connector Assignment. Refer to the appropriate Wiring Diagram.