LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 313 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Headrest Guide, Removing And Installing >> Headrest Guide, Removing And Installing, Headrest With Height And Angle Adjuster >> Removing

Headrest Guide, Removing And Installing, Headrest With Height And Angle Adjuster: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the backrest seat cover and cushion. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .

Vehicles with Rear Seat Entertainment System:

GWWA72-12695Courtesy of AUDI

-- Release and disconnect the connector -2-.

-- Unclip the wiring harness -3- on the multimedia system display unit bracket -1- -arrow-.

-- Remove the bolts -4-.

-- Remove the multimedia system display unit bracket -1-.

Vehicles without Rear Seat Entertainment System:

GWWA72-12054Courtesy of AUDI

-- Remove the bolts -A arrows-.

-- Release the tab -arrow B- and remove the cover -1-.

Continuation:

-- Press the tabs down at the same time -arrows-.

GWWA72-12017Courtesy of AUDI

-- Remove the headrest guide -1- upward.