LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 313 (Seat Frames) >> 72 Seat Frames >> Front Seat Pneumatic System >> Massage Mat, Removing And Installing >> Removing

Massage Mat, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the backrest cover and cushion. Refer to BACKREST COVER AND CUSHION, SEPARATING .

-- If necessary, loosen the bottom of the heating element -1- from the adhesive in the area of the center cushion.

GWWA72-12629Courtesy of AUDI

-- Fold back or lift up the foam pieces -2, 3, and 4- with heating element -arrows-. Loosen from the adhesive if necessary.

Super Sport Seat:

GWWA72-12630Courtesy of AUDI

-- Remove the clips -arrows-.

-- Thread the pneumatic lines and pneumatic connector at the top and bottom of the cushion.

-- Remove the massage mat -1-.

Comfort Seat:

GWWA72-11908Courtesy of AUDI

-- Fold back or lift up the foam sheets -1 and 5-. Loosen them from the bonding if necessary.

-- Remove the clips -3, 4 and 6-.

-- Remove the massage mat -2-.