Massage Function Valve Block, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- The backrest cover is removed. Refer to BACKREST COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -2- at the massage function valve block by pressing the securing tab -arrow B-.
-- Remove the pneumatic line -1- by lifting the safety catch slightly with a small flat-head screwdriver -arrow A-.
-- Unclip the massage function valve block -1- from the module carrier -A arrows-.
-- Disengage the massage function valve block downward from the module carrier -B arrows-.
-- Disconnect the pneumatic connectors -1, 2, and 3- from the massage function valve block by pressing the release buttons -arrows-.
-- Remove the massage function valve block.