Seat Belt Webbing, Checking

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Procedure

-- Pull the belt completely out of the automatic belt retractor or lap belt adjustment tongue.

-- Check the seat belt webbing for contamination, wash with mild soapy water if necessary. Refer to the appropriate Service Information.

If one of the types of damage (1 and 2), shown in the following, is detected on a vehicle which has been in an accident, the entire seat belt must be replaced with the belt latch.
If damage as illustrated under points 1, 2 or 3 is determined on a vehicle that has not been in an accident, only replace the damaged seat belt.
1 - Seat belt webbing cut, torn or frayed.

Fig 1: Belt Webbing Cut, Torn Or Chafed
Courtesy of AUDI
2 - Webbing loops on seat belt edge torn.

Fig 2: Checking Belt Webbing - Webbing Loops On Belt Edge Torn
Courtesy of AUDI
3 - Burn marks from cigarettes or similar.

Fig 3: Burn Marks From Cigarettes Or Similar
Courtesy of AUDI