LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Air Conditioning (Refrigerant R134A Refrigerant Circuit)) >> 87 Air Conditioning >> Refrigerant Circuit General Information >> Refrigerant Circuit Component Allocation, Influence On High And Low Pressure Sides >> O-Rings

Refrigerant Circuit Component Allocation, Influence On High And Low Pressure Sides: O-Rings

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

These rings seal off the connection points between individual components of the refrigerant circuit.

Fig 1: Checking O-Ring Seal Diameters
GWWA87-0021Courtesy of AUDI OF AMERICA, LLC

Only O-rings that are resistant to refrigerant R134a and the associated refrigerant oil may be used. Make sure they are original replacement parts.

O-Rings:

-- Always use only once.

-- Make sure diameters -a- and -b- are correct.

-- Coat with refrigerant oil before installing. Refer to Refrigerant Circuit (vehicle-specific Service Information) and the Parts Information.

NOTE:

The O-ring color coding for refrigerant circuits with R134a has been discontinued. Black and colored O-rings are used. Refer to Parts Information and Refrigerant Circuit (vehicle-specific Service Information).