LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Cooling System (Servicing - 6-Cylinder 2.9L; 3.0L 4V TFSI Ea839 Engine)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Coolant Valves, Removing And Installing >> Coolant Shut-Off Valve, Removing And Installing, 2.9L Engine >> Removing

Coolant Shut-Off Valve, Removing And Installing, 2.9L Engine: Removing

WARNING: This page is about a different car, the 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the lower air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING .

-- If necessary, remove the front coolant pipe. Refer to COOLANT PIPES, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the coolant shut-off valve -2-.

GWWA19-12528Courtesy of AUDI

-- Remove the vacuum hose -1- at the same time to not damage it.