LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Cooling System (Servicing - 6-Cylinder 2.9L; 3.0L 4V TFSI Ea839 Engine)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Coolant Pump, Removing And Installing >> Removing

Coolant Pump, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the coolant pipes. Refer to COOLANT PIPES, REMOVING AND INSTALLING .

-- Remove the vacuum hose -arrow- at the same time to not damage it.

Fig 1: Coolant Pump - Tightening Sequence
GWWA19-12525Courtesy of AUDI

-- Remove the bolts -1 to 7- and remove the coolant pump.