Towing Recognition Control Module -J345-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment.
-- Move the ignition key outside of the vehicle to prevent the ignition from switching on unintentionally.
-- Remove the luggage compartment left trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .
-- Release and disconnect the connectors -3- and -4-.
-- Press the retainers together -A arrows-.
-- Remove the Towing Recognition Control Module -J345- -item 2- with the bracket -1-.
-- Release the retaining tabs from the bracket -1- -A arrows-.
-- Pivot out the Towing Recognition Control Module -J345- -item 2- -arrow B-.