Spoiler, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear lid upper trim panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .
-- Release and disconnect the connectors -1 and 2-.
-- Free up the cable grommets -3- by releasing the retainers -A arrows-.
-- Remove the nuts -arrows-.
-- Close the rear lid.
-- Press the spoiler -2- off of the rear lid using the Wedge Set :T10383/1 -item 1- and remove it -arrows-.
-- If the spoiler is to be replaced, also remove the following components:
- High-mounted brake lamp. Refer to HIGH-MOUNTED BRAKE LAMP BULB, REMOVING AND INSTALLING .