Overview - Roof Railing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Nut
- Insert with locking fluid. Refer to the appropriate Electronic Parts Information.
- Tightening specification and sequence. Refer to Fig 2.
- Lifter
- Removing and Installing. Refer to LIFTER, REMOVING AND INSTALLING .
- Insert with locking fluid. Refer to the appropriate Electronic Parts Information.
- 1 Nm
- Seal
- Seal
- Seal
- Roof Railing
- Removing and Installing. Refer to ROOF RAILING, REMOVING AND INSTALLING .
- Seal
- Seal
- Seal
- Seal
- Roof Rack Recognition Sensor -G625-
- Removing and Installing. Refer to Roof Rack Recognition Sensor -G625-, REMOVING AND INSTALLING .
- Seal
- Lifter
- Removing and Installing. Refer to LIFTER, REMOVING AND INSTALLING .
- Insert with locking fluid. Refer to the appropriate Electronic Parts Information.
- 1 Nm
- Nut
- Insert with locking fluid. Refer to the appropriate Electronic Parts Information.
- Tightening specification and sequence. Refer to Fig 2.
- Wire
Roof Railing - Tightening Specification and Sequence
-- Tighten the nuts to 10 Nm in the sequence -2, 3, 4, 1-.