Overview - Radiator Grille
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- End Panel
- Center
- Removing and Installing. Refer to CENTER END PANEL, REMOVING AND INSTALLING .
- Bolt
- Quantity: 6
- 2 Nm
- Laser Distance Regulation Control Module -J1122-
- Removing and Installing. Refer to LASER DISTANCE REGULATION CONTROL MODULE -J1122-, REMOVING AND INSTALLING
- Control Module for Adaptive Cruise Control -J428-
- Removing and Installing. Refer to DISTANCE REGULATION CONTROL MODULE -J428-, REMOVING AND INSTALLING
- Bolt
- Quantity: 2
- 2 Nm
- Night Vision System Camera -R212-
- Removing and Installing. Refer to NIGHT VISION SYSTEM CAMERA -R212-, REMOVING AND INSTALLING
- Cover
- For the emblem
- Removing and Installing. Refer to RADIATOR GRILLE NAME BADGES AND EMBLEMS, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- Tightening specification. Refer to NIGHT VISION SYSTEM CAMERA -R212-, REMOVING AND INSTALLING
- Securing Plate
- For the front peripheral camera
- Removing and Installing. Refer to FRONT PERIPHERAL CAMERA -R243-, REMOVING AND INSTALLING
- Front Peripheral Camera -R243-
- Removing and Installing. Refer to FRONT PERIPHERAL CAMERA -R243-, REMOVING AND INSTALLING
- Bolt
- Quantity: 2
- Tightening specification. Refer to FRONT PERIPHERAL CAMERA -R243-, REMOVING AND INSTALLING
- Bracket
- For the front peripheral camera
- Removing and Installing. Refer to FRONT PERIPHERAL CAMERA -R243-, REMOVING AND INSTALLING
- Bolt
- Quantity: 2
- 2 Nm
- Cover
- Left
- For the radiator grille
- Radiator Grille
- Removing and Installing. Refer to RADIATOR GRILLE, REMOVING AND INSTALLING .
- Sensor Cover
- For control module for adaptive cruise control
- Removing and Installing. Refer to SENSOR COVER, REMOVING AND INSTALLING .
- Lid
- Removing and Installing. Refer to SENSOR COVER, REMOVING AND INSTALLING .
- Front Trim
- Removing and Installing. Refer to FRONT TRIM, REMOVING AND INSTALLING .
- License Plate Bracket
- Bolt
- Quantity: 4
- 2 Nm
- Strip
- For the radiator grille
- Cover
- For the front peripheral camera
- Removing and Installing. Refer to FRONT PERIPHERAL CAMERA -R243-, REMOVING AND INSTALLING
- Name Badge
- Removing and Installing. Refer to RADIATOR GRILLE NAME BADGES AND EMBLEMS, REMOVING AND INSTALLING .
- Cover
- For washer nozzle for Laser Distance Regulation Control Module -J1122-
- Removing and Installing. Refer to LASER DISTANCE REGULATION CONTROL MODULE -J1122-, REMOVING AND INSTALLING
- Emblem
- Removing and Installing. Refer to RADIATOR GRILLE NAME BADGES AND EMBLEMS, REMOVING AND INSTALLING .
- Cover
- Right
- For the radiator grille