LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 295 (Exterior Equipment) >> 66 Exterior Equipment >> Name Badges And Emblems >> Radiator Grille Name Badges And Emblems, Removing And Installing >> Emblem, Removing And Installing

Emblem, Removing And Installing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Remove the center end panel. Refer to CENTER END PANEL, REMOVING AND INSTALLING .

-- If equipped, remove the peripheral camera. Refer to the appropriate Service Information .

-- Release the retainers -2- -arrow A- at the shown points -arrows-.

GWWA66-12164Courtesy of AUDI

-- Remove the cover -1-.

-- Release the retainers -1- -arrows- by lifting the securing tab -2-.

GWWA66-11918Courtesy of AUDI

-- Remove the emblem from the radiator grille -3-.

Installing

Install in the reverse order of removal while noting the following:

-- Press on the emblem until it audibly engages.