Wheel Housing Extension, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of AUDI
|
-- Remove the clamps -arrows-.
-- Carefully warm the wheel housing extension -1- using the Wiring Harness Repair Set - Hot Air Blower:VAS 1978/14A
.
-- Carefully pry out the wheel housing extension -1- using the Wedge : T10383/1
-3- from the wheel arch trim -2-.