Rear Wheel Arch Trim, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Clean the body with Cleaning Solution.
TIP:
Check the foam strips -3- when reinstalling the wheel arch trim -5-.
-- Remove the protective film from the adhesive tape in the front area of the wheel arch trim -5-.
-- Position the wheel cover -5- starting at the side panel -1- to the bumper cover -2-.
-- Press the wheel cover on until it clicks into place.