Front Wheel Arch Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the front wheel housing liner in the area of the bumper cover. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Release the connectors -arrows- and remove the wheel arch trim -2- from the bumper cover.
-- Carefully warm up the wheel arch trim -2- using the Wiring Harness Repair Set - Hot Air Blower:VAS 1978/14A .
-- Release the wheel arch trim -2- with the Wedge Set :T10383/1 -1- from the fender and remove.