Sill Panel Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Versions with illuminated sill panel:
-- Remove the front sill panel. Refer to SILL PANEL, REMOVING AND INSTALLING .
-- Lift the carpet slightly and release and disconnect the connector -3-.
-- Free up the wire by slightly pulling the seal -2- away from the body flange.
Continuation:
-- Carefully warm up the sill panel trim -1- using the Wiring Harness Repair Set - Hot Air Blower:VAS1978/14A .
-- Carefully pry out the sill panel trim from the side sill -arrow- using the Trim Removal Wedge:3409 . Do not damage the paint coat while doing so.