Drip Rail Clamping Strip, Removing And Installing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Drill out the rivet heads -arrows- and drive out the rivet shafts.
-- Remove the clamping strip -1-.
Installing
Install in the reverse order of removal while noting the following:
-- Start riveting the clamping strip -1- at the topmost hole.
Installation Instructions. Refer to OVERVIEW - DRIP RAIL .