Cover, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Open the door.
Front door:
-- Loosen the seam seal in the area of the door cover -2-. Refer to SEAM SEAL, REMOVING AND INSTALLING .
-- Carefully warm up the door cover -2- using the Wiring Harness Repair Set - Hot Air Blower:VAS 1978/14A and using the wedge :T10383/1 , pry out of the door -1- and disengage downward -arrows-.
Rear door:
-- Loosen the seam seal in the area of the door cover -2-. Refer to SEAM SEAL, REMOVING AND INSTALLING, FRONT .
-- Carefully warm up the door cover -2- using the Wiring Harness Repair Set - Hot Air Blower:VAS 1978/14A and using the wedge :T10383/1 , pry out of the door -1- and disengage downward -arrows-.