Overview - Wheel Bearing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Wheel Bearing Housing
- Removing and installing. Refer to WHEEL BEARING HOUSING, REMOVING AND INSTALLING .
- Bolt
- Always replace after removing
- 80 Nm + 90°
- Drive Axle
- There are different versions. Refer to OVERVIEW - DRIVE AXLE .
- Bolt
- 8 Nm
- Bracket
- For wires
- Wheel Bearing
- Wheel Bearing Unit, Removing and Installing. Refer to WHEEL BEARING UNIT, REMOVING AND INSTALLING .
- Wheel Bearing Unit, Servicing. Refer to WHEEL BEARING UNIT, SERVICING .
- Handling the wheel bearing. Refer to Fig 2.
- Wheel Hub
- Bolt
- Drive Axle Threaded Connection, Loosening and Tightening. Refer to DRIVE AXLE THREADED CONNECTION, LOOSENING AND TIGHTENING .
Wheel Bearing, Handling
Always set the wheel bearing unit down on the wheel hub -1-.
CAUTION:
Contamination increases the risk of destroying the wheel bearing.
- Protect the contact surfaces on the wheel bearing from dirt.