Shock Absorber Fork, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Attach the shock absorber fork.
- The T-pin -1- of the suspension strut must engage in the groove -arrow- on the shock absorber fork until stop.
-- Install the coupling rod. Refer to COUPLING ROD, REMOVING AND INSTALLING .
- Overview table for when an axle alignment is needed. Refer to NEED FOR AXLE ALIGNMENT, EVALUATING .