Sway Stabilization Control Module -J924-, REMOVING AND INSTALLING, AUDI Q7/Q8, VEHICLE INTERIOR AT RIGHT A-PILLAR: Notes

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

On Audi Q7 without a connector in the wiring harness the Sway Stabilization Control Module -J924- is installed in the right wheel housing. Refer to Sway Stabilization Control Module -J924-, REMOVING AND INSTALLING, AUDI Q7, RIGHT FRONT WHEEL HOUSING .