LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 291 (Front Suspension) >> 40 Front Suspension >> Stabilizer Bar >> Sway Stabilization Control Module -J924-, REMOVING AND INSTALLING >> Sway Stabilization Control Module -J924-, REMOVING AND INSTALLING, AUDI Q7, RIGHT FRONT WHEEL HOUSING >> Installing

Sway Stabilization Control Module -J924-, REMOVING AND INSTALLING, AUDI Q7, RIGHT FRONT WHEEL HOUSING: Installing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Re-energize the 48 Volt system. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Complete the "Control Module, Replacing" program after replacing the Sway Stabilization Control Module Sway Stabilization Control Module -J924-, using the Vehicle Diagnostic Tester.

scientia non olet · About LEMON Manuals