LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Exterior Equipment (Fy)) >> 66 Exterior Equipment >> Roof Molding/Roof Railing >> Roof Railing, Removing And Installing >> Removing

Roof Railing, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the head curtain airbag igniter from the body. The head curtain airbag remains installed. Refer to HEAD CURTAIN AIRBAG WITH IGNITER, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

GWWA66-11485Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows- and move the bracket -2- to the side.

-- Remove the nuts -1 to 5-

Fig 1: Roof Railing - Tightening Sequence
GWWA66-11484Courtesy of AUDI OF AMERICA, LLC

-- Remove the roof railing upward.