LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Exterior Equipment (Fy)) >> 66 Exterior Equipment >> Moldings, Trims, Extensions And Trim Panels >> Trim Molding, Removing And Installing >> Trim Molding, Removing And Installing, Side Window >> Removing

Trim Molding, Removing And Installing, Side Window: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the side window. Refer to REAR SIDE WINDOW, REMOVING AND INSTALLING .

-- Bend the tabs -1- straight.

GWWA66-11463Courtesy of AUDI OF AMERICA, LLC

-- Carefully pry the trim molding -2- out of the window guide and remove.

scientia non olet · About LEMON Manuals