LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Exterior Equipment (Fy)) >> 66 Exterior Equipment >> Moldings, Trims, Extensions And Trim Panels >> Running Board, Removing And Installing >> Removing

Running Board, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front underbody panel. Refer to UNDERBODY TRIM PANEL, REMOVING AND INSTALLING, FRONT .

-- Remove the tank underbody trim panel. Refer to UNDERBODY TRIM PANEL, REMOVING AND INSTALLING, TANK .

-- Remove the cover for the front -16-, center -14- and rear -12- mounts. Refer to OVERVIEW - RUNNING BOARD .

-- Support the running board with a second technician. 

-- Remove the nuts and bolts from the front -1-, center -4- and rear -7- mounts. Refer to OVERVIEW - RUNNING BOARD .

-- Remove the running board.