Suspension, AUDI Q8
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
| Front Axle |
Multi-link suspension, transverse stabilizer coil springs: twin gas-filled struts, coil springs air suspension: air suspension strut with variable levels and damping characteristics, guide link with hydraulic damping mounts |
| Rear axle |
Multi-link suspension with suitable spring/shock allocation, transverse stabilizer coil springs: twin gas-filled struts, coil springs air suspension: air suspension strut with variable levels and damping characteristics |
| Chassis |
Standard coil springs 1BL in curb weight position. Refer to TEST REQUIREMENTS, AUDI Q7
. |
Standard air suspension 1BK/2MA/2MB at standard level TEST REQUIREMENTS, AUDI Q7 |
|
| Wheelbase |
mm |
2995 |
2998 |
|
| Front track width |
mm |
1679 |
1683 |
|
| Rear track width |
mm |
1691 |
1693 |
|
- The specified values apply to all engine types.
- Front/rear track width only applies to 265/55R19 tires on 8.5Jx109 rims.
- Track widths change when using different wheel/tire combinations.
- The specified size applies to equipment levels with air suspension on the standard vehicle height.