14.Steering Gear with, Replacing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
| Audi Q7 |
Audi Q8 |
- Chassis
- 0001 - OBD-capable systems
- 0044 - Power Steering Control Module J500
- 0044 - Power Steering Control Module, functions
- 0044 - Replace control module
|
- Diagnostic-capable systems
- 0044 - Power Steering Control Module J500
- 0044 - Power Steering Control Module, functions
- 0044 - Replace control module
|
15. Steering Gear End Positions, Adapting
| Audi Q7 |
Audi Q8 |
- Chassis
- 0001 - OBD-capable systems
- 0044 - Power Steering Control Module J500
- 0044 - Power Steering Control Module, functions
- 0044 - Basic setting
|
Not required, since already included in the "Power Steering Control Module - J500, Replacing" program. Refer to 14.Steering Gear with, Replacing . |
16. Rear Axle Steering Gear, Moving into Zero Position
| Audi Q7 |
Audi Q8 |
- Chassis
- 0001 - OBD-capable systems
- 00CB - Rear Axle Steering - J1019
- 00CB - Rear Axle Steering Control Module, Functions
- 00CB - Adaptation
|
- Diagnostic-capable systems
- 00CB - Rear Axle Steering - J1019
- 00CB - Rear Axle Steering Control Module, Functions
- 00CB - Adaptation
|
17. Rear Axle Steering Gear with Rear Axle Steering Control Module -J1019-, Replacing
| Audi Q7 |
Audi Q8 |
- Chassis
- 0001 - OBD-capable systems
- 00CB - Rear Axle Steering - J1019
- 00CB - Rear Axle Steering Control Module, Functions
- 00CB - Replace control module
|
- Diagnostic-capable systems
- 00CB - Rear Axle Steering - J1019
- 00CB - Rear Axle Steering Control Module, Functions
- 00CB - Replace control module
|