Left Front Parallel Parking Assistance Sensor -G568- /Right Front Parallel Parking Assistance Sensor -G569-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Basic: loosen the front wheel housing liner in the front area. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- S line SQ8: remove the air intake grille. Refer to OVERVIEW - BUMPER COVER .
-- Press both tabs in direction of -arrows- to the side and press the sensor -1- inward from the outside.
-- Disconnect the connector -2- by sliding the retainer -3- toward the rear and pressing the release down.