Wiring Harness Repair Set:VAS631001

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

The Wiring Harness Repair Set:VAS631001 makes optimal repair quality possible in the realm of vehicle electronics. Using this wiring harness repair set, repairs affecting aluminum wires in the area of the harness connectors and for breaks in wiring can be performed. The copper repair wires are also used and complete repair wires with already crimped on/connected contacts. The connection with the vehicle-specific wiring harness takes place with three different wire cross-sections butt connectors.

The Wiring Harness Repair Set:VAS631001 for aluminum wires is comprised of the following components:

Crimping tool without crimp insert and positioning aid :VAS631001/1
Crimping insert and positioning aid 25 mm² -aluminum wires :VAS631001/2
Crimping insert and positioning aid 4 mm² -aluminum wires :VAS631001/3
Crimping insert and positioning aid 6 mm² -aluminum wires :VAS631001/4
Wire stripper for aluminum wires :VAS631001/5

CAUTION:

For repairing the aluminum wires only use the corresponding butt connectors with heat-shrinkable tube. Refer to the appropriate Electronic Parts Information.

NOTE:

Additional information:

Refer to the Wiring Harness Repair Set:VAS631001 Service Information.