LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 286 (Wires) >> 97 Wires >> Wiring Harness And Connector Repairs >> Wiring Harness Repair Set >> Release Tool Set:VAS1978/35

Release Tool Set:VAS1978/35

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

The Release Tool Set:VAS1978/35  is used to release the various primary and secondary locking mechanisms on VW-group vehicles. The set consists of 26 different tools which can be used to professionally release or assemble e.g. round connector systems, flat terminals with one or two locks as well as single wire seals.

Fig 1: Identifying Release Tool Set (VAS 1978/35)
GWWW00-10402Courtesy of AUDI

The allocation of the correct release tools to the respective locking mechanisms can be found in the table in the Release Tool Set:VAS1978/35  Operating Instructions.