Primary Lock

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

The primary lock is the locking mechanism of an individual crimp contact in the connector housing.

If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts. Refer to SECONDARY LOCK .

The shapes of the primary locks depicted in the following are only a selection which, as an example, should make clear the various functions of the primary lock.

Round connector systems. Refer to ROUND CONNECTOR SYSTEMS .
Flat connector systems. Refer to FLAT CONNECTOR SYSTEMS .
Special connector systems. Refer to SPECIAL CONNECTOR SYSTEMS .

The allocation of the correct release tool for the respective locks can be found in the table in the Release Tool Set:VAS1978/35 Operating Instructions.