Carbon Brushes, VALEO Generator From 2001, Checking

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Procedure

Fig 1: Carbon Brush Checking, Valeo Generator, From 2001

Courtesy of AUDI

-- Remove voltage regulator. Refer to VOLTAGE REGULATOR, VALEO GENERATOR FROM 2001, REMOVING AND INSTALLING .

-- Check the length -a- of the carbon brushes.

Wear limit: -a- = 5 mm.

-- Install the voltage regulator. Refer to VOLTAGE REGULATOR, VALEO GENERATOR FROM 2001, REMOVING AND INSTALLING .