Standard Vehicle Height, Initiating And Locking
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
Procedure
-- If the standard vehicle height is initiated and locked, select the "Standard Vehicle Height, Initiating and Locking". Refer to DIAGNOSTIC ENTRIES .
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.
- If the program "0074 - Standard Vehicle Height, Initiating and Locking" has been activated, then the program "0074 - Basic setting activate regulation" must be performed.