Overview - Bumper Cover Mount

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Bumper Cover Mount

Courtesy of AUDI

Mount
- Side
- For the bumper cover
- Removing and Installing. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING, SIDE .
Bolt
- Quantity: 4
- Tightening sequence. Refer to Fig 2.
Nut
- 2.5 Nm
- Quantity: 2
Mount
- Center
- For the bumper cover
- Removing and Installing. Refer to CENTER BUMPER COVER MOUNT, REMOVING AND INSTALLING .
Nut
- 2.5 Nm
- Quantity: 6
Lower Mount
- For the bumper cover
- Removing and Installing. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING, BOTTOM .
Nut
- 2.5 Nm
- Quantity: 4

Bumper Cover Side Mount - Tightening Specification and Sequence

Fig 2: Bumper Cover Side Mount - Tightening Sequence

Courtesy of AUDI

-- Tighten the bolts in the sequence shown -1 to 4- to 3 Nm.