Reflector, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Clean the adhesive surface using the Cleaning Solution:D 009 401 04 .
-- Apply the Plastic Primer:D 366 PR1A1 to the adhesive surface using the Applicator:D 009 500 25 and let dry.
-- Remove the protective film from the adhesive tape -3 and 4-.
-- Position the reflector -2- and press it onto the bumper cover -1-.
- Vehicle resting time is at least 3.5 hours at room temperature.