Bumper Cover Trim, Removing And Installing, Side: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Tape off the painted surface in the trim using adhesive tape -2 and 4-, so that the paint will not be damaged.
 Courtesy of AUDI
|
-- Position the scraper -1- as shown and release the catches.
-- Remove the trim -3-.
-- Release and disconnect the connector.