Overview - Impact Member
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Quantity: 4
- 8 Nm
- Support
- Right
- For headlamp mount
- Removing and Installing. Refer to HEADLAMP MOUNT SUPPORT, REMOVING AND INSTALLING .
- Support
- Left
- For headlamp mount
- Removing and Installing. Refer to HEADLAMP MOUNT SUPPORT, REMOVING AND INSTALLING .
- Expanding Rivet
- Bracket
- For the Outside Air Temperature Sensor -G17-
- Removing and Installing. Refer to Outside Air Temperature Sensor -G17- BRACKET, REMOVING AND INSTALLING .
- Impact Member
- Removing and Installing. Refer to IMPACT MEMBER, REMOVING AND INSTALLING .
- Bolt
- For securing the impact member to the lock carrier
- 4.5 Nm
- Bolt
- Quantity: 8
- 60 Nm
- Air Duct
- Left
- Molded Foam Part
- Removing and Installing. Refer to MOLDED FOAM PART, REMOVING AND INSTALLING .
- Air Duct
- Right